Home > Gun Maintenance > Gunsmithing > Gunsmithing Tools >

Coil Mainspring Vise
Coil Mainspring Vise
 
Our Price: $40.00

Quantity in Stock:1

Availability:: Usually Ships in 24 Hours
Product Code: CMV
Qty:

Description
 
This tool is designed to safely compress the coil mainspring in a Thompson Center and other similar imported locks that use a coil mainspring. Novice gun owners may try to disassemble a coil mainspring lock using a needle nose Vice-GripĀ® pliers, but then the coil mainspring goes flying across the room only to be lost.
This tool allows for easy removable and installation of a coil mainspring. Simply lower the hammer all the way down. Center the tool hooks on the mainspring plunger collar and plunger boss. Then squeeze gently. The coil mainspring will compress enough to allow the mainspring and plunger to be removed from the tumbler notch. It securely holds the compressed mainspring in place while removing it. Gently let go to release it from the tool. To install the mainspring back in the lock, center the tool on the mainspring plunger boss and hook the other end back on the collar of the mainspring plunger. Squeeze slightly and set the mainspring plunger back into the tumbler notch.
Removal and installation can be done in just a few seconds. Never have your mainspring go flying across the room again.


Share your knowledge of this product. Be the first to write a review »